Menu
Menu
Both powerful and very diffuse, the Medium Flat MFDOME+ Overdrive can deal with many machine vision applications. The MFDOME+ has been designed to detect small pieces in a container, to highlight thermoformed products or also to improve contrasts on workpieces made of several materials. It works in continuous and strobe mode, with very short rising and falling times: 25 μs and 15 μs.
Equipped with very thin borders, the MFDOME+ uniformly illuminates from the whole useful surface, included from the edges. No hot spot to notice ! Very thin, the MFDOME+ gets a hole in the middle to insert the camera’s lens. And using the TPL Vision mounting accessories (in option), you can easily integrate it thanks to the mounting plate.
The connector can be placed on any side of the MFDOME+, which can then be set up on any kind of conveyor belts. At the basis of the connector, 2 LED indicators show if the product is powered and if the strobe mode is on.
To view all the technical information, please click on the tabs below.
| MFDOME+ | HPFDOME | |
| Sizes | 200×200 mm to 900×900, or 1900 x 400mm | 200×200 mm to 900×900, or 1900 x 400mm |
| Modes | Continuous and Strobe OverDrive | Continuous and Strobe |
| Brightness level | Up to 32 kLux in CW Up to 61 kLux in OverDrive | Up to 45 kLux in CW |
| Rise and fall time | 25 μs and 15 μs | 15μs and 10μs |
| OverDrive | Yes | No |
| Connector | M12 T-Power 4-P | M12 5-P with remote dimming control |
| Connector position | Flexible, see technical sheet | Flexible, see technical sheet |
| IP Protection | IP40 | IP40 |
| Customisation options | No | Custom sizes available in 1 cm steps. Two-hole version available on request. |
The connector can be placed on any side of the MFDOME+, which can then be set up on any kind of conveyor belts. At the basis of the connector, 2 LED indicators show if the product is powered and if the strobe mode is on.
To view all the technical information, please click on the tabs below.
| MFDOME+ | HPFDOME | |
| Sizes | 200×200 mm to 900×900, or 1900 x 400mm | 200×200 mm to 900×900, or 1900 x 400mm |
| Modes | Continuous and Strobe OverDrive | Continuous and Strobe |
| Brightness level | Up to 32 kLux in CW Up to 61 kLux in OverDrive | Up to 45 kLux in CW |
| Rise and fall time | 25 μs and 15 μs | 15μs and 10μs |
| OverDrive | Yes | No |
| Connector | M12 T-Power 4-P | M12 5-P with remote dimming control |
| Connector position | Flexible, see technical sheet | Flexible, see technical sheet |
| IP Protection | IP40 | IP40 |
| Customisation options | No | Custom sizes available in 1 cm steps. Two-hole version available on request. |
