Menu
Menu
The MR-LOW ANGLE is compound of a bi-colour LED lighting ring (2 sets of colours and 2 dimensions) and a low angle reflector, with an angle of incidence of 45°.
It has been designed with tough production environments in mind: IP65 as standard, overdrive embedded, simple remote control capability (selection of colours and quadrants).
It is used for applications where a direct light source is considered too harsh or bright but the diffused light provided by the Dome version is not enough intensity. The light source will provide some degree of homogeneity.
Reflected light can be used when:
The MR-LOW ANGLE should be mounted close to the object of interest to maximise the effect of the illumination style. Moving it further away from the object will lower the light intensity recorded by the camera and weaken the effect of the coloured light and illumination style.
TPL Vision is extremely careful about BIN sorting in the selection of LEDs for their products.
Specifically for the Cyan series on this product, the human eye is very sensitive to colour variations. It may appear to the customer that they do not appear the same between two cyan LED products. Despite any noticeable differences, the peak wavelength variation does not exceed 10nm.
Here are the following bandpass camera filters we recommend to fit with the Modular Ringlight:
We advise using bandpass filters from MidOpt: http://www.midopt.com
To view all the technical information, please click on the tabs below.
Reflected light can be used when:
The MR-LOW ANGLE should be mounted close to the object of interest to maximise the effect of the illumination style. Moving it further away from the object will lower the light intensity recorded by the camera and weaken the effect of the coloured light and illumination style.
TPL Vision is extremely careful about BIN sorting in the selection of LEDs for their products.
Specifically for the Cyan series on this product, the human eye is very sensitive to colour variations. It may appear to the customer that they do not appear the same between two cyan LED products. Despite any noticeable differences, the peak wavelength variation does not exceed 10nm.
Here are the following bandpass camera filters we recommend to fit with the Modular Ringlight:
We advise using bandpass filters from MidOpt: http://www.midopt.com
To view all the technical information, please click on the tabs below.
