Menu
Menu
TPL Vision offer various types of accessories to enable easy integration and use of our machine vision lighting solutions. Among our most popular accessories are mounting devices, angle changers, bandpass filters and diffusers that allow users to complete and/or customise their illumination setup.
Showing 61–73 of 73 results
Compatible with the following products:
End of life products:
Compatible with the following products:
Compatible with the following products:
Compatible with the following products:
Compatible with the following products:
Compatible with the following products:
Compatible with the following products:
Discover TPL Vision’s new Optical Trigger, a very ingenious tool that will save you time in your integration. It’s not complicated anymore to add an external illumination on a smart camera. With the Optical Trigger, any camera with built-in illumination can now easily communicate with TPL Vision lights without the need for wiring. Place the Optical Trigger in front of the camera: as soon as the built-in illumination of the camera is on, the Optical Trigger automatically switches the external lighting on synchronously. The Optical Trigger is very responsive: it has very short rising and falling times (4 µs).
The Full FCONTROL is a current control electronics module that provides led systems with steady current. Easy to use, it enables a very precise setting of the output current. Therefore, thanks to the Full FCONTROL, led lightings are perfectly protected against the temperature and supply voltage variations. The Full FCONTROL can work from 7 VDC to 30 VDC. In all cases, the supply voltage has to be higher than the expected voltage for the leds. The strobe activation and the current setting are made through switches. Each channel is customizable separately.
The Time TCONTROL is an electronics module that enables the control and the regulation of current in TPL Vision’s led lightings manufactured without electronics (SE), only in strobe mode. Thanks to the Time TCONTROL, you can supply the lighting with power, regulate the current, control the rising time and control the camera triggering (from 5 ms to 1 000 ms). The Time TCONTROL is equipped with 2 switches: switch 1 for the current setting and switch 2 for the rising time control. According to the kind of lighting, the Time TCONTROL has to be supplied with a voltage situated between 7 VDC and 28 VDC. Thanks to a delayed-action output (PNP or NPN), it enables the triggering of the shooting at the most relevant time, when the lighting intensity is stabilised.
The Speed SCONTROL enables the power supply of lightings similar to ThinLED, in 700 mA with very short rising and falling times. It works only in strobe mode, and cannot be customised. Even with very short shooting times, the user can easily synchronise the lighting with the camera. The strobe input being optocoupled, the triggering system is isolated from the rest of the internal electronics. As soon as there is a positive voltage between + Strobe and – Strobe, the Speed SCONTROL lights the led system. To gain additional speed, the regulation is made through linear regulators. The latter absorb excess energy, so as to offer the most relevant current/voltage ratio for the lighting. The Speed SCONTROL is protected against polarity reversal in inputs, so as to avoid any risk of destruction because of wrong connections.
TPL Vision encourages all LED lighting users to take maximum protection measures. In that respect, the company distributes protective glasses, designed to offer an optimized protection on a wide lighting spectrum: from 350 nm to 1 000 nm, what covers all wavelengths used by TPL Vision to build its led lightings.